Viso knygų: 1065
el. paštaskodas

Knygų lentyna/Mokslo konferencijų ir pranešimų medžiaga/Advanced Materials and Technologies. Book of Abstracts of 24th International Conference-School

ADVANCED MATERIALS AND TECHNOLOGIES
PROGRAMME
LECTURES
Getting Started in Computational Electromagnetics & Photonics
Photonic Metastructures for Intracavity Spatial Filteringin Microlasers
Stable Silicon Anode Design for Lithium-Ion Batteries Enabled by Post-Electrode-Engineering
Prospects of Next Generation Solid Oxide Cell Technologies for Energy Conversion
Self-Powered Triboelectric Tactile Modules Derived from Crosslinked, One Component Rubbers
Polymer Triboelectrification Mechanisms and Application for Mechanical Energy Harvesting
Electromagnetics & Photonics in the Age of Digital Manufacturing
4D Microprinting by Direct Laser Writing
Distinctive Features of Diffusion-Controlled Defect Recombination in Irradiated Functional Ceramics for Nuclear Applications
Functional Inorganic Materials for Environmental Applications: Synthesis and Characterization
AI for Sustainable Development: Challenges and Opportunities
Deep Learning Enhanced Nanoscale Acoustic Measurements
Bringing Science to Market: Case Studies
Topology for Electrons in Solids, Photons and Ultracold Atoms
Photons for the World Around Us
How to Bridge the Gap Between Academic and Industry-Oriented Sensor Research
Bandgap Engineering in Bismuth-Containing Semiconductors
The Evolution of Optical Coatings: from 1D to 3D Periodic Structures
Blue Light Emitting Facial Isomer of Tris (8-Hydroxyquinoline) Aluminum: Facile Synthesis and Formation Mechanism of Thermodynamically Unstable Isomer
Effects of Nanostructuring in Liquid Crystalline Systems: Physico-Chemical Studies and Molecular Models
How to Start and Maintain an Awesome Career
Hierarchical Integration of Electrospinning and 3D/4D Printing Process for Rapid Prototyping
Manipulating Light by Plasmonic and Dielectric Metasurfaces
Resistive Switching Phenomena in Nanostructures
Monolayers as Selective Materials for Solar Cell Technologies: from Idea to Record
POSTER PRESENTATIONS
METHODS OF SURFACE ANALYSIS. P1-P8
A-P1. Characterization of the Degradation of Elastomeric Gasket by Accelerated Ageing
B-P2. Ultrasonically Induced Nanofatigue Characterization on Thin Films
A-P3. Estimation of Structural Stability of Tungsten-Boron Thin Films at Elevated Temperatures
B-P4. Application of Electrochemical Techniques for the Detection of Antibodies Against SARS-CoV-2 Spike Protein
A-P5. Analysis of the Stress-Strain State of Yarn Based on the Theory of Elasticity
B-P6. Study on Electrochemical Immunosensor for the Detection of Specific Antibodies
A-P7. Accompanying Processes on CNTs During the Lithium Intercalation/Deintercalation from an Aqueous Solution
B-P8. Application of electrochemical techniques for the detection of antibodies against SARS-CoV-2 Spike Protein
SURFACE ENGINEERING AND NANOSTRUCTURES. P9 – P35
A-P9. Developement of GaAsBi/GaAs MQW Technology for Applications in NIR VECSELs
B-P10. Introduction of Magnetic Impurities into the Bi2Se3 Nanowires
A-P11. Ultrashort Pulse Laser Irradiation as a Versatile Tool for Efficient Ablation, Surface Texturing, and Polishing
B-P12. Modeling of Crystals and RNA with X-RAYS
A-P13. Binding of Yeast Cells to Diamond Nanoparticles Irradiated with UV Radiation
B-P14. Production of Copper Oxide Nanowire Networks for Thermoelectric Applications
A-P15. Influence of Physical Vapor Deposition Synthesis Conditions on Bi2Se3 Nanoribbon Thickness and Surface Topology
B-P16. Integration of Bi2Se3 Nanowires in Nanoelectromechanical Devices
A-P17. Innovative Holographic Code to Ensure the Authenticity of Products
B-P18. New « Chameleon » Inks
A-P19. Preparation of MIP-Based Electrochemical Sensor on MWCNTs@PDMS Nanocomposite Surfaces for TET Detection
B-P20. Non-damaging optical determination of Nanoporous Alumina Layer Thickness During Anodization Process
A-P21. Refractometric Sensing of Variable Size Noble Metal Nanoparticles on Porous Anodic Aluminum Oxide
B-P22. Application of Photoactivated ZnO Nanoparticles to Microbial Control of Strawberries
A-P23. Hydrothermal Synthesis and Characterisation of Fe2+ Doped Calcium-Deficient Hydroxyapatite
B-P24. Precise Drilling of Glass Ampoules by Femtosecond Laser
A-P25. The Evaluation of Structural Anisotropy in Nanostructured Thin Films by Autocorrelation Method
B-P26. Integration of Nanostructured Sensor for the Electrochemical Detection of Biomarkers: Towards Search for Life in Space
A-P27. Simple and Low-Cost Nickel Particles Assembly as Catalyst in Carbon Nanotube Production Using Plasma Enhanced Chemical Vapor Deposition
B-P28. Efficiency and Quality Aspects in Laser-Milling of Aluminum Alloy Using Nanosecond, Picosecond, and Hybrid Nanosecond-Picosecond Pulses
A-P29. Femtosecond Laser Micromachining Parameter Influence of Hole Quality in Porous Stainless Steel Substrates
B-P30. Surface Lattice Resonance in Silver Nanoparticle Array for Surface-Enhanced Raman Scattering Spectroscopy
A-P31. Quantum-Point-Contact Modelling of the Filaments in Ta2O5 Resistive Switching Devices
B-P32. Surface Roughness Impact on Surface Potential in TiO2 and TiOxNy Thin Films
A-P33. Annealing of Austenitic Stainless Steel
B-P34. Detection of Cyanide Ions by Gold Nanorods Etching
A-P35. Highly Efficient and Switchable Chirality Transfer between Protein and Achiral Plasmonic Assemblies
ELECTRONIC AND OPTICAL MATERIALS. P36 – P74
B-P36. Different Substitution Effects on the Formation and Properties of Yttrium Aluminium Garnet
A-P37. Thermal Modification and Analysis of changes for Innovative Tungsten Thin Films of Various Thickness
B-P38. Investigation of Ultraviolet Persistent Luminescence of Pr3+ Activated Complex Alkaline Earth Oxides
A-P39. THz Emission Spectra of 2D Plasmons Excited in Grating-Gated AlGaN/GaN Heterostructures
B-P40. Synthesis, Structural and Luminescent Properties of Mn‐Doped Calcium Pyrophosphate (Ca2P2O7) Polymorphs
A-P41. Effect of Different Donor Substituents of Perfluorobiphenyl on the Performance of the Derivatives in OLEDs
B-P42. Raman Subwavelength Lattice: Time-Dependent Detuning
A-P43. Size Effect on Crystalline Structure and Dynamic Optical Properties of Silver Nanoparticles
B-P44. New Host Material for Highly Efficient CandlelightOLED with a Very Low Color Temperature
A-P45. Two Dimensional Subwavelength Optical Trap for Ultracold Atoms
B-P46. Environment Effects on Laser Induced Damage Threshold of Sculptured Thin Film Based All-Silica Mirrors
A-P47. Spatial Patterning of Rydberg Atoms Using Electromagnetically Induced Transparency with Optical Vortex Fields
B-P48. New Donor-Acceptor Pyrimidine-Based Emitters, Containing Acridine, Carbazole and Phenothiazine Moeties
A-P49. Optical Spectroscopy of Upconverting K2Bi(PO4)(MoO4):20%Yb3+, Er3+ Phosphors
B-P50. Characterisation of New TADF Emitters Based on 1,4-Bis(trifluoromethyl)benzene as an Acceptor Moiety
A-P51. Characteristic Assessment of WSe2 Thin Films Synthesized from W and WOx Precursor Materials
B-P52. Exciton Migration and Recombination in Rubidium-Cesium Alloyed, Quasi-two-dimensional Perovskite
A-P53. Derivatives of Triphenylamine and Dibenzothiophene-2-yl(phenyl)methanone Exhibiting Long-Lived Emission for Detection of Oxygen
B-P54. Synthesis and Studies of Properties of Organic Semiconductors Containing Donor and Acceptor Moieties
A-P55. Donor Substitution Effects on the Properties of 6-(Trifluoromethyl)quinoxaline-Based Green Emitters
B-P56. Derivatives of Benzoyl-1H-1,2,3-triazole and Carbazoleas Hosts in Solution Processed White OLEDs
A-P57. From Green to Blue: How Annealing Affects Emission Properties Acridone Derivatives with Phenoxazine Substitutes
B-P58. Simulation of Squeezing Models via Laser Coupling in an Atomic Fermi-Hubbard Model
A-P59. Synthesis of Copper-Doped Zinc Sulfide Nanomaterials
B-P60. Synthetic Approaches to New Heterocyclic UnitContaining Conjugated Monomers and Polymers
A-P61. Quantum-Point-Contact Modelling of the Filaments in Ta2O5 Resistive Switching Devices
B-P62. Tetraphenyl Ornamented Derivative of Diphenylsulfone and Carbazole as TADF Host for OLEDs
A-P63. Triphenylethene-Carbazole-Based Molecules for theRealization of Blue and White Aggregation-Induced Emission OLEDs
B-P64. Luminescence Mechanisms of AlN Materials
A-P65. Synthesis and Characterization of Blue Emitting Multicarbazolyl-Substituted Benzonitriles
B-P66. Theoretical Modeling of Luminescence Lineshape in Silicon Due to a Carbon-Carbon Pair Complex
A-P67. Investigation of Methoxy-Substituted Carbazole Based Monomers and Polymers for Organic Light Emitting Diodes
B-P68. Optimization of Quantum Structures for Applications in Near-Infrared Sources
A-P69. Azimuthal Modulation of Electromagnetically Induced Grating Using Structured Light
B-P70. Control of Fluorescence and Phosphorescence of Imidazo[4,5]phenazine Based Compounds
A-P71. The Application of the SCAN Density Functional to Colour Centres in Diamond
B-P72. Biased GaAs/AlGaAs Superlattice as Dissipative Parametric Amplifier in Microwaves
A-P73. UV Investigation (Optical Properties) of CdS Layers on Polypropylene Film
B-P74. Optimization of subwavelength diffraction grating parameters for antireflection in the optical range
CERAMICS. P75 – P83
A-P75. Synthesis and Structural Properties of Zinc Whitlockite (Ca18Zn2(HPO4)2(PO4)12)
B-P76. Influence of Calcination Temperature on Morphology of Synthetic Cuspidine
A-P77. Development of Surface Analysis Methodology for High Energy Heavy Ion Irradiated Lithium Orthosilicate Based Ceramic Pellets
B-P78. LaFeO3 Thin Films on Silicon: Phase Purity Studies
A-P79. X-ray Induced Defects in Lithium-Containing Ceramics Synthesized via Solid-state Reaction Route
B-P80. Photoluminescence Measurements of Biphasic Lithium Orthosilicate-Metatitanate Pellets
A-P81. Wood – Ceramic Composites: Analysis of GdPO4·H2O:Eu3+ Modified Wood
B-P82. Elastic Properties of Ceramics Determined by the Ultrasonic Method and Prediction of the Porosity Dependence of Sound Velocities
A-P83. Pyrochlore and Perovskite Transparent Ceramics: Light Scattering and Optical Properties
POLYMERS AND COMPOSITES. P84 – P103
B-P84. Composite Derived from Hydroxyapatite and Iron Oxide – a Multifunctional Material
A-P85. Green Synthesis, Characterization and Antimicrobial Activity of Silver Nanoparticles Synthesized by Artemisia Absinthium L. and Thymus Vulgaris L.
B-P86. Metal-Infused ABS for the Additive Manufacturing of Complex Phantom Devices and Shielding Equipment
A-P87. Investigation of Dose Response in Polymer Gel Dosimetry
B-P88. Theoretical Modeling of Complex Fancy and Combined Weft-Knitted Structures
A-P89. Optical writing in the structure of Negative SU8 Photoresist Using up-Conversion Luminescence of Yb3+ and Tm3+ Activated Nanoparticles
B-P90. Synthesis and Investigation of Biocompatible Piezoelectric Material
A-P91. Thermal Properties of Sheep Wool Fibers Stored under Different Conditions
B-P92. Improvement of Hydrophobicity and Mechanical Properties of Newly Developed Banana Fiber Nonwoven Reinforced Polymer Composites
A-P93. Thermoelectric properties of Flexibe Encapsulated Bismuth Selenide and Carbon Nanotube Hybrid Structures
B-P94. Bending Properties of CNT and Sb2Te3 or Bi2Se3 Hybrid Structures Supported by Different Polymers
A-P95. Fabrication of Flexible Bi2Se3/CNT Heterostructure-Based Thermoelectric Materials
B-P96. Synthesis of Adhesive Block Brush Copolymers Carrying Phosphorylcholine Moieties
A-P97. A Study on Barrier Performance of Medical Face Masks Available to Lithuanian Public
B-P98. Effects of Isocyanate Addition on Viscosity of Ester-Based Polyurethanes
A-P99. 4D Printing Based on Hydrogel
B-P100. Use of Raman Spectroscopy to Determine the Quality of Graphene Transferred onto Sulphonated Poly(ether ether ketone) Membranes
A-P101. Design of Micro-Actuators Made of Liquid Crystal
B-P102. Challenges in Developing Futuristic High-End Wearable Electronic Textiles
A-P103. Antimicrobial Composites for Medical Applications
ADVANCED ENGINEERING MATERIALS. P104 – P119
B-P104. Zn-Al Double Hydroxide and Based on Its Compositions as Potential Photocatalyst
A-P105. Comparison of Optical Properties of Porous Anodized Aluminium Oxide with and without Gold Nanoparticles
B-P106. Long Term High Temperature Corrosion Evaluation of Porous Fe20Cr, Fe22Cr and Fe27Cr alloys in Temperature Range 600 °C – 900 °C
A-P107. MOVPE Growth and Investigation of Flexible Thin GaN Films
B-P108. Synthesis, Photophysical and Electrochemical Study of the Compounds Containing Cyano Groups and Their Application in Electroluminescent Devices
A-P109. Development of Nanofiber Sheet with Enhanced Antibacterial Activity for Potential Application in Medical Devices
B-P110. Impact of Compositional Disorder on Electron Transport in Multicomponent Scintillation Crystals
A-P111. Multilayer Tubular Products from Powder Materials
B-P112. Influence of Synthesis and Ambient Drying Conditions on the Porosity of Tio2 Aerogel
A-P113. Moisture Management Properties of Biodegradable Knitted Fabrics Containing Hemp and Polylactide Fibers
B-P114. Towards Effective Gating of TI-Based Devices
A-P115. New Hydraulic Binder Prepared from Metakaolin, Anhydrite and Calcium Hydroxide
B-P116. Influence of Linear Density of Yarn on Heat Generation of Composite Knit Fabric
A-P117. Zinc Oxide Nanowires for Room Temperature UV Sensors prepared by Different Coating Methods
B-P118. Determination of Hot/Cool Properties of Different Weft Knitted Structures
A-P119. Investigation of 3D Weft-Knitted Fabrics for Special Purposes
MATERIALS FOR ENERGY. P120 – P136
B-P120. Obtaining of Nitrogen-Doped Graphene Using a Green-Chemistry Method
A-P121. Development and Investigation of a Single Enzyme Based Glucose Biofuel Cell
B-P122. Ternary Platinum-Cobalt-Ceria on Graphene Oxide as Highly Efficient Catalyst for Fuel Cells
A-P123. Functional Cathode Layers in Solid Oxide Fuel CellsPrepared with the Spin-Coating Technique with the Use of aPrecursor with the Addition of Methocel
B-P124. The Effect of Binder on Electrochemical Properties of Cathode Materials for Sodium- and Lithium-Ion Batteries
A-P125. Energy Harvesting from Environment Using Ferroelectrect Material for Powering Electronic Devices
B-P126. Molecular Engineering of Hole Transporting Materials for Efficient Perovskite Solar Cells
A-P127. Biofuel Cell Based on Prussian Blue – Modified Saccharomyces Cerevisiae Cells
B-P128. Synthesis and Electrochemical Performance of Na2FeP2O7/C Electrode Material for Sodium-Ion Batteries
A-P129. Evaluation of Biofuel Properties Using Thermogravimetric Analysis and Gamma Spectrometry Methods
B-P130. Electrochemical Studies of Modified Saccharomyces Cerevisiae
A-P131. Ionic Liquids for Sodium-Ion Batteries
B-P132. Oxygen Evolution Reaction in Presence of Ca2Fe2O5 Slurry in Aqueous Solution
A-P133. Amphoteric Aqueous Zn-MnO2 Battery with Potential up to 2.4 V
B-P134. Beryllium Contamination Quantitative Detection on Surfaces Using Spectrophotometric Analysis
A-P135. Graphene/n-Si(100) Diode, Formed Using Transfer-Less Method, Operation in Different Thermal Conditions
B-P136. Material Dependent Peculiarities of Testing Solar Cells Using Solar Simulators Based on Light Emitting Diodes (LEDs)
INDEX OF CONTRIBUTORS

Advanced Materials and Technologies. Book of Abstracts of 24th International Conference-School

 
Svetainėje yra naudojami slapukai. Daugiau apie naudojamus slapukus.