Viso knygų: 1065
el. paštaskodas

Knygų lentyna/Mokslo konferencijų ir pranešimų medžiaga/Advanced Materials and Technologies. Book of Abstracts of 23rd International Conference-School

ADVANCED MATERIALS AND TECHNOLOGIES
Sponsors
23rd International Conference-School. ADVANCED MATERIALS AND TECHNOLOGIES Programme
LECTURES
Sars-Cov-2 Antigen Binding to Specific Antibody Kinetics Analysis by Spectroscopic Ellipsometry
Facile One-pot Solid-state Synthesis of Si/Cu3Si/Cu/C Anode for High Performance Lithium-ion Batteries
FTIR Spectroscopy: A Promising Method in the Characterization of Calcium Phosphates
Synthesis and Phase Transformations in Calcium Phosphates
Colourful Laser 3D Nano-Printing
Tuneable GHz and MHz Femtosecond Burst for Various Material Processing
Controlling Materials-Space in Inorganic Materials
Light in Electrochemistry: How to Make Use of It?
Light – The Ubiquitous Technology
Topological Photonics
Fire Resistance of Materials
How to Use Wood as a Material More Efficiently?
Nanofibers of High-performance Electret Polymers for Tactile Sensing and Wearable Electronics
Carbazole-Based Organic Compounds in Organic Light Emitting Diodes, OLED, Applications
Metal Oxide Interlayers for Scalable Organic and Perovskite Solar Cells
Inorganic Nanocatalysts for Efficient Material Conversion
Electro Caloric Cooling: Fundamentals and Electrocaloric Oxide Materials
Electro Caloric Cooling: EC Upper Limit, Material Efficiency and EC Devices
Currently Existing and Cutting Edge Technologies for Isotope Separation
POSTER PRESENTATIONS
METHODS OF SURFACE ANALYSIS P1-P12
A-P1. Contact Angle Measurements as a Method of Surface Analysis
A-P2. Analysis of Interaction Kinetics between SARS-CoV-2 Nucleoprotein and Specific Antibody by Combined SE/QCMD Method
A-P3. Influence of Silk Wastes Indicators on Silk-raws Roughness
A-P4. Intercalation of Organic Anions to the Mg3Al1 Layered Double Hydroxide Using Ion Exchange Approach
B-P5. Towards Electrochemical Affinity Sensors for the COVID-19 Diagnosis
B-P6. Evaluation of Chlorophyll-a Immobilization within Tethered Bilayer Lipid Membrane
B-P7. Preparation of Bare Metallic Nanostructures and Activity Mapping with Scanning Electrochemical Microscopy
B-P8. Thermal Annealing Effect on the Structure of LiF Single Crystals Irradiated with Swift 36S Ions
C-P9. Facile Preparation of Iodine-doped Graphene and its Application as Low Cost Catalyst for Hydrogen Fuel Cells
C-P10. Probing Light-induced Surface Charge Kinetics Using Kelvin Probe Force Microscopy in a Non-imaging Mode
C-P11. Preliminary Study of Electrophysical Properties of Blood in Dependence on Rh-factor
C-P12. Various Factors of Weave Estimation and their Correlation with Some Properties
SURFACE ENGINEERING AND NANOSTRUCTURES P13 – P59
A-P13. Determination of ZnO Tetrapods Particle Size and Distribution in Solvents
A-P14. Heat-Energy Generation by X-rays Interaction with Si Crystals
A-P15. Ultrafast Laser Surface Structuring for Wettability Control of Stainless Steel
A-P16. In-situ XPS Analysis of Thermally Induced Changes in the Molecular Structure of Plasma Deposited CoOx-based Nanocatalysts
A-P17. Impact of Amino Acids on the Electrocatalytic Properties of MoS2 Films
A-P18. Heat Transfer in Ultrafast Laser Interference Ablation
A-P19. Optical Elements Generating Bessel-like Beams
A-P20. Gold Microbumps Gratings Exciting Hybrid Lattice Plasmon Polaritons
A-P21. Synthesis of Colloidal Gold and Silver Solutions Using Laser Ablation
A-P22. Porous Anodized Aluminium Oxide Thickness Dependence on Anodization Time
A-P23. Corrosion Behavior of Electrodeposited Ceria Oxide Coatings on Zinc Surface
A-P24. Controlled Growth of Au Hierarchically Ordered Crystals Architectures for Electrochemical Detection of Traces of Molecules
A-P25. Distributed Feedback Waveguide Laser under Second-Order Bragg Conditions
A-P26. Distributed Feedback Lasers Based on the Mixture of Cholesteric Liquid Crystals and Organic Semiconductors
A-P27. Novel Synthesis of Graphene Oxide: Structural and Electrochemical Investigation
A-P28. Robotized Mechanical Manipulation in Micro-scale
B-P29. Thermal Reduction of Graphene Oxide Using Carbon Suboxide
B-P30. Wet Chemical Etching of Bi2Se3 Nanoribbons
B-P31. Composition and Fluorescence Properties of Electrochemically Synthesized Nanoporous Anodic Alumina/Carbon Composites
B-P32. Manipulation and Characterization of Individual Nanostructures
B-P33. Simulation of TiO2 and TiO2/Au Nanoparticles Interaction with Gram-negative Bacteria Envelope Membrane Using Molecular Dynamics and Monte-Carlo Methods
B-P34. Modelling and Optimization of Aloe vera/PVA/ZnO Nanomembranes and Their Applications in Nonwoven Masks
B-P35. Microwave-Assisted Solvothermal Synthesis and Characterization of NaYF4 Nanoparticles
B-P36. Nickel Thin Films as a Catalyst in Graphene Growth by Plasma-enhanced CVD
B-P37. Plasma Deposited Alumina-based Washcoat for Catalytic Structured Packings
B-P38. Analysis of the Oxygen Plasma Treatment Influence on the Properties of Diamond-Like Carbon Nanocomposite Films with Copper
B-P39. Microwave Synthesis of Magnetic Fe3O4 Nanoparticles
B-P40. Catalyst-Less and Transfer-Less Synthesis of Graphene on Si(100) Using Direct Microwave Plasma Enhanced Chemical Vapor Deposition and Protective Enclosures
B-P41. Artificial Phospholipid Membrane Formation on Tin Oxide Surfaces
B-P42. Obtaining of Platinum-cobalt-ceria Supported on Graphene Oxide and Application as Electrocatalysts
B-P43. Coprecipitation Synthesis of Adjustable Size Magnetic Fe3O4 Nanoparticles
B-P44. Fabrication of Double Period Diffracting Gratings Employing Moiré Patterns in Holographic Lithography
C-P45. Impact of Graphene Transferred onto Au Nanoparticles Deposited on Porous Alumina Template
C-P46. Synthesis and Structural Characterization of Magnetically-doped Bi2Se3 Nanostructures
C-P47. Effect of Au Catalyst Morphology on the Growth of Bi2Se3 Nanoribbons
C-P48. Hall Effect Measurements in TI Nanoribbons
C-P49. Preparation of Bi2Se3/CNT High Porosity Material
C-P50. Glass Processing with Different Laser Techniques
C-P51. Photoluminescence of Variable-Length Zinc Oxide Nanorods Embedded in Porous Anodic Aluminum Oxide Matrix
C-P52. Switching with Bi2Se3 Nanoribbons at Cryogenic Temperatures
C-P53. Fabrication of Templates for Nanoparticle Deposition Based on Mesoporous Silicon with Open Pores
C-P54. Integration of Nanostructured Sensor for the Electrochemical Detection of Biomarkers: Towards Search for Life in Space
C-P55. Ultrafast Plasmon Relaxation Dynamics of Various Shapes Gold Nanoparticles
C-P56. Copper Interconnections with High Adhesion to Silicon for MEMS Technology
C-P57. Ultrafast Modulation of the Surface Lattice Resonance via Optomechanical Modes
C-P58. Optical Properties of Coatings Based on Plasmonic and Up-conversion Nanoparticles for Solar Cells
C-P59. Sensing of Vascular Endothelial Growth Factor Using Zinc Oxide - Porous Anodic Aluminum Oxide Hybrid Film
ELECTRONIC AND OPTICAL MATERIALS P60 – P109
A-P60. On the Formation of Amorphous Phases at High Temperature
A-P61. Ultraprecise Rydberg Atomic Localization Using Standing Waves and Optical Vortices
A-P62. Investigation of Optical Properties of ZnO Nanotetrapods
A-P63. Investigation of Sm Doped Bismuth Ferrite Across its Phase Boundary from Local and Microscopic Perspectives
A-P64. Investigation of Diphenylsulfone Derivatives as Hosts for TADF based OLEDs
A-P65. Tri/Tetraphenylethenyl Substituted Tetrafluorophenylcarbazoles as Exciplex-forming Hosts for Organic Light Emitting Diodes
A-P66. Characterization of Photoluminescence Garnet Coatings Derived by Sol-Gel Spin/Dip Coating Techniques
A-P67. Off-axis Optical Vortices Using Double-Raman Singlet Light-Matter Scheme
A-P68. All-organic Exciplexes Exhibiting Host with Thermally Activated Delayed Fluorescence
A-P69. Effect of Different Additional Electron Accepting Moieties on Electroluminescent Properties of Trifluoromethyl-containing Multicarbazoles
A-P70. Effect of Different Number of Di-tert-butylcarbazole Donor Moieties of Bipolar Hosts on Their Performance in OLEDs
A-P71. Derivatives of Trifluoromethylphenyl and Various Donors as Emitters Exhibiting Thermally Activated Delayed Fluorescence and Room-Temperature Phosphorescence
A-P72. Synthesis of Controlled Size GdPO4·H2O Nanorods
A-P73. Evidence of a Strong Coupling Regime in a Photonic-Plasmonic Structure Supporting Hybrid Tamm-Surface Plasmon Polaritons
A-P74. Application of Dianthracenylazatrioxa[8]circulene in OLEDs and QLEDs
A-P75. High Triplet Energy Aryl Sulfones for Exciplex-based White Electroluminescent Devices
A-P76. Determination of Dominant Recombination Processes by Extraction of Injected Charge Carriers
B-P77. Synthesis and Investigation of the Properties of Electroactive Heteroaromatic Compounds
B-P78. Red-fluorescing BODIPY-based Polarity Sensor
B-P79. Investigation of Tantalum (V) or Vanadium (V) Doped YAG Phosphors
B-P80. Synthesis and Properties of Star-Shaped 1,8-naphthalimide Based Derivatives
B-P81. Structural and Electrical Investigation of the “Buffer-Free” AlGaN/GaN Heterostructures on SiC Substrate
B-P82. Synthesis and Studies of Properties of Organic Semiconductors Containing Donor and Acceptor Moieties
B-P83. Characterisation of Colored Glass Plates with Bragg Lattice Structure Formed from Sol-gel Solutions
B-P84. Novel Phosphate Glass Matrices as a Potential Host for Luminescent Rare Earth Ions
B-P85. FTIR Analysis of Oxidized Tungsten and Tungsten Diboride Nanolayers
B-P86. Synthesis and Analysis of YAG Doped with Pentavalent Ions
B-P87. Luminescence Properties of Doped and Undoped ZnO Single Crystals, Ceramics and Powders
B-P88. Spectroscopic Investigation of BODIPY-based Fluorophores for Sensing Viscosity
B-P89. Synthesis of Novel Y1-xLnx(BTC)(DMF)2(H2O) and Y0.8-xYb0.2Lnx(BTC)(DMF)2(H2O) Metal Organic Frameworks and Determination of Their Upconversion Properties
B-P90. Measurement of Magnetic Field at Cryogenic Temperatures Using Thin Polycrystalline Manganite-cobaltite Films
B-P91. Synthesis and Studies of Iminostilbene Containing DA-D Type Emitters
B-P92. Mobile Charged Defects Determines Multiphase Performance Dynamics of Perovskite LEDs
C-P93. Modification of Polyamide 6 Films Surface by the Layers of Cadmium Sulfide – Cadmium Telluride
C-P94. Manganite Film Application for Microsecond Duration High Magnetic Field Measurement
C-P95. Formation of Cobalt Sulfide Films on Polyamide Surface by Sorption-diffusion Method
C-P96. Luminescence of AlN:Eu
C-P97. Carbazole-Based Hole-Selective Monolayers for Solar Cells
C-P98. Novel Sintering Additive for Densification of Transparent YAG Ceramics
C-P99. THz Excitation Spectroscopy of the Layered Semiconductor Crystals
C-P100. Neural Network Enabled Prediction of Power Reflection of Polarized Light from Material Surface
C-P101. Sol-gel Synthesis of Transparent Nanoporous Monolithic Silicon Dioxide Glass
C-P102. Growth and Investigation of Bi-containing A3-B5 Compounds
C-P103. Synthesis of Manganese-doped Zinc Sulfide Nanomaterials
C-P104. Study of Defects in Hafnia via Luminescent Properties
C-P105. Dependence of Electrical Properties of Bismuth Selenide Nanoribbons on External Electrical Field and Bending at 5 K
C-P106. Investigation of Radiation Induced Defect Stability in GAGG:Ce for Particle Collider Detector Applications
C-P107. The Influence of Different Chemical Synthesis Methods on Physical Properties of HfO2 Nanoparticles
C-P108. Chromium-doped Alumina as a Potential Dosimetric Material
C-P109. Theoretical and Experimental Investigation of Mobilities of Tetraoxa[8]circulene
CERAMICS P110 – P123
A-P110. Low-temperature Synthesis and Characterization of Magnesium Whitlockite Powder
A-P111. Thermoluminescence Properties of Yttria Doped AlN Ceramics After Sunlight and X-ray Irradiation
A-P112. Preparation of CaMnO3-based Compounds Applying Molten Salt Synthesis
A-P113. Influence of Sample Pre-treatment on Radiation-Induced Processes in Advanced Ceramic Breeder Pebbles
B-P114. Synthesis of Neodymium Iron Orthoferrites, Fabrication into Coatings and Nanotubes
B-P115. Influence of Fe3+ Doping on Thermally Induced Crystallization and Phase Evolution of Amorphous Calcium Phosphate
B-P116. The Influence of Thermal Synthesis Parameters on Mayenite Structure
B-P117. Comparative Study of Zinc Whitlockite Synthesized by Different Methods
B-P118. Photoluminescence of Lithium Orthosilicate Pellets Prepared via Solid-state Synthesis
C-P119. Impact of the Initial pH Value on the Calcium Phosphate Ceramics Derived from Eggshells
C-P120. Thermal and Elastic Properties of Open Kelvin-cell Metamaterials – Computer Modeling of Systematic Processing Defects in Ceramic Foams
C-P121. A New Method for the Formation of Bioceramic Nano-calcium Hydroxyapatite Coatings
C-P122. Role of Mechanical Activation on Sintering of NBT Ceramics
C-P123. Hydrothermal and Microwave Assisted Hydrothermal Synthesis of Sodium Bismuth Titanate
POLYMERS AND COMPOSITES P124 – P150
A-P124. Structural Parameters of Fabric Affecting Performance of Electromagnetic Shielding Textile with Conductive Coating
A-P125. Evaluation of Wettability and Water Absorption Properties of Natural Fiber Reinforced Polyester Hybrid Composites for Microfluidic Applications
A-P126. Surface Modification and Physico-mechanical Properties of Newly Developed Banana Fiber Nonwoven Material
A-P127. Curing of BPA-based Epoxy Resins Using Various Amines: Study by DSC
A-P128. Synthesis of Brush Copolymers Carrying Phosphorylcholine Moieties
A-P129. Incorporation of Modified organic PCM microcapsules with conductive additives into textiles
A-P130. Electrochemical Deposition of Polypyrrole Layers Modified by Phenothiazine Derivatives
A-P131. Permeation System Optimization for Analysis of Polymers and Other Membranes
A-P132. Analysis and Evaluation of Mechanical Properties of 3D Printed Heels
B-P133. Poly(amidoamines) Containing Disulfide Bonds as Efficient Reagent for DNA Transfection
B-P134. Improvement of Anti-abrasion Properties of Anticorrosive Epoxy Coating for Industrial Applications
B-P135. Spectrometric and Thermal Analysis of Radiation Modified Natural Keratinous Fibers
B-P136. Development of PEDOT:PSS-based Screen Printing Inks for Stretchable Electrochromic Thin Films
B-P137. Effect of Thermoplastic Meltdown on the Joint Produced by Laser Quasi-simultaneous Transmission Welding
B-P138. Investigation of N,N'-Methylenebisacrylamide Influence on Sensitivity of Polymer Gel Dosimeters with Reduced Toxicity
B-P139. Processing of Polymer Materials with High Energy Stream of Powder Particles
B-P140. Attenuation Properties of Thin Layers Silicone Composites Containing Metal Basis and Comparison with Lead and Lead-free Protection Materials Used in Clinical Practice
B-P141. Effect of Gold Surface Roughness on Growth of Lactic Acid Bacteria
C-P142. Viscosity Variation During Addition of Ester and Ether Macrodiols to Isocyanates
C-P143. Simulation of Single Lap Adhesive Joints Behaviour by Finite Element Method
C-P144. Tendencies of Solid Phase Formation in Deep Eutectic Solvents of Betaine and Xylitol
C-P145. Cost Optimization of Polycarbonate Matrix for Antibacterial Composites
C-P146. Toward the Development of Sensors and Actuators by 4D Printing
C-P147. 4D Micro-printing: Photocomposites for the Realization of Micro-actuators
C-P148. The Influence of Orange Essential Oil on the Structure of Electrospun Polyvinylpyrrolidone Mat
C-P149. Synthesis and Characterization of Encapsulated Bi2Se3/CNT and Sb2Te3/CNT Hybrid Structures
C-P150. Synthesis and Flexibility Tests of CNT-Metal Chalcogenide Thermoelectrical Thin Films
ADVANCED ENGINEERING MATERIALS P151 – P181
A-P151. Influence of Silver Additives Containing Fibers Incorporated in Knitted Fabrics on their Thermoregulation Properties
A-P152. Spruce Cones as Precursors for Obtaining Effective Carbon Adsorbents
A-P153. Doping of Activated Carbon with Magnetic Nanoparticles
A-P154. Preparation and Characterization of Physicochemical Properties of TiO2/Bi Composites
A-P155. Photocatalytic Properties of Composite Materials Prepared by Mechanochemical Synthesis
A-P156. Black Silicon-based SERS-active Substrates for the Doxorubicin Concentration Determination
A-P157. Stable and Uniform Black Silicon-based SERS-active Substrates for the Detection of Analytes with a High Potential for Reusability
A-P158. Study of Tensile Properties of Antistatic Knitted Fabrics
A-P159. How the Presence of Chitosan Influences the Properties of Polyethylene Terephthalate in Terms of its Biocompatibility
A-P160. Hybrid Tamm-surface Plasmon Polaritons Mode Based on Planar Plasmonic Photonic Nanostructures for Highly Sensitive Real Time Biosensing of GsCF and BSA Proteins
A-P161. Formation of Oriented Hydroxyapatite Structures Through the Hydrolysis of Ion-doped Alpha-tricalcium Phosphate
B-P162. Study of Puncture-resistant 3D Knitted Fabrics
B-P163. Study of Organic Semiconductors Containing Phenyl(pyridin-4)methanone Group and the Different Acceptor Moieties
B-P164. Remote Epitaxy of GaN via Few-layer Graphene
B-P165. Development of Multi-layered Weft-knitted Fabrics for Thermal Insulation
B-P166. Influence of Synthesis and Subcritical Drying Conditions on the Porosity of TiO2 Aerogel
B-P167. 3D Printing Concrete Modification with Waste
B-P168. Electrodeposition of Fe2O3 on Anodic TiO2
B-P169. Mechanical Characteristics of Thigh Prosthesis Materials
B-P170. Silica Sol Characterization and Particle Size Dependence to Environmental Factors
B-P171. Theoretical Modelling of Weft-Knitted Structures
C-P172. Sol-Gel Fabrication and Characterization of Different Garnet Structure Compounds
C-P173. Modified Williamson-Hall Method in USDM Model for Estimating More Accurate Values of Young’s modulus of Hydroxyapatite
C-P174. Waste Fluid Catalytic Cracking in the Systems of Binding Materials
C-P175. The Cyclic Stress Strain Behaviour of Electroconductive Compression Fabrics on Heat Generation
C-P176. GaN Polarity Inversion using ALD-Al2O3 Interlayer
C-P177. Investigation of Long-Term Stability of Resistivity and Magnetoresistance of Nanostructured La-Sr-Mn-Co-O Films
C-P178. Laser Technology for Epitaxial GeSn Layers: Redistribution of Sn Atoms by Nd:YAG Laser Radiation
C-P179. Comparison of Simulated p-type Si1−xGex and Si LGAD with Traps
C-P180. Laser-induced Oxidation of Titanium Foils: Control of TiO2 Phases
C-P181. The Comparative Study of Different Hardened Cement Paste Systems with Zeolitic Waste Containing Ammonium Ions
MATERIALS FOR ENERGY P182 – P215
A-P182. Sb2Se3 Growth Mechanism on Mica Muscovite Substrates
A-P183. Biocathode for Glucose Biofuel Cell Based on H2O2 Reduction: Synthesis, Optimization and Electrical Properties
A-P184. Changes in Tritium Concentration after Sorption Depending on Storage Conditions
A-P185. Oxidation of Neutron-Irradiated & Non-Irradiated Beryllium in Air at Elevated Temperatures with Varying Relative Humidity
A-P186. Investigating Effects of 3-dimensional Graphite Anodes on the Electrochemical Property of Lithium-ion Batteries
A-P187. Synthesis and Investigation of Na4Fe3(PO4)2(P2O7) for Aqueous Na-ion Batteries
A-P188. The Effect of Diphenyl Diselenide as a Bi-functional Additive for High Voltage LiNi0.8Mn0.1Co0.1O2/graphite Battery
A-P189. Charge Carrier Transport at Close-to-Real Operation Conditions of Organic Solar Cells
A-P190. Using of Polypyrrole-modified Graphite Electrode as Biofuel Cell Anode
A-P191. Enhanced Stability and Photovoltage for Multication Perovskite Solar Cells via Hindering Photo inactive Perovskite Phase Formation
A-P192. Development of Enzymatic Biofuel Cells
B-P193. Microbial Biofuel Cell Based on Saccharomyces Cerevisiae Modified with Polypyrole
B-P194. Photoelectrochemical Performance of Anodically Formed Nanostructured SnOx/FTO Systems
B-P195. Stabilisation of Na3V2(PO4)3 as Cathode Material for Aqueous Sodium-ion Batteries
B-P196. Development of Methodology for Preparation and Transportation of Lithium Orthosilicate Based Ceramic Pellets for High Energy Heavy Ion Irradiation Experiments
B-P197. Precisely Controlled Carbon Coating of NaTi2(PO4)3 for Enhanced Electrochemical Performance
B-P198. Aqueous Electrochemical Properties and Stability of Isovalently and Aliovalently Substituted Na1±yTi2-xMx(PO4)3 (M= Zr(IV), Hf(IV), Al(III), Mg(II))
B-P199. Influence of Hydrothermal Annealing on Photocurrent Response of ZnO Nanowires Obtained by Anodic Oxidation of Metallic Zinc in Bicarbonate Electrolytes
B-P200. Rotating Ring-disc Electrode Study of Cathode Materials for Aqueous Na-ion Battery
B-P201. Investigation of Competition Between Photo-Oxidation of Water and Anions on WO3 Photoanode in Chloride and Sulfate Electrolytes
B-P202. Fe2O3-WO3 Heterojunction Operating Under Visible Light Spectrum
B-P203. Synthesis of CdS on FTO/ZnO by Chemical Bath Deposition Method
B-P204. Investigation of SILAR Deposition of Cadmium Selenide Thin Films on FTO/ZnO Substrate from Aqueous Solutions
C-P205. One-step Synthesis of Nitrogen-doped Graphene Oxide as Electrocatalyst for Fuel Cells
C-P206. Aqueous Degradation Protection of NaTi2(PO4)3 by ALD
C-P207. Synthesis and Properties of Bismuth and Antimony Chalcogenide Based Nanolaminates on Graphene Substrates
C-P208. Monolayers with Different Linkers for Perovskite Solar Cells
C-P209. Intensity Modulated Photocurrent Spectroscopy as a Tool for WO3 Photoanode Characterization
C-P210. Polyetheretherketone Composites with Ionic Liquids for All Solid Sodium-ion Batteries
C-P211. Electrochemical Properties of Single-walled Carbon Nanotubes (SWCNT) Using LiNO3 Aqueous Electrolyte
C-P212. Features of the Formation of Natural SEI Layers from Aqueous Electrolytes on the Surface of SWCNT and Bi2Se3 Anodes and Their Impacts on the Electrochemical Properties
C-P213. Sulfonated Polyetheretherketone and Graphene Composite Membranes: Preparation and Characterization
C-P214. 2-methyl-1,4-naphthoquinone Mediated Microbial Fuel Cell
C-P215. Bi2Se3 Thin Films for Aqueous Na-ion Batteries
Index of Contributors

Advanced Materials and Technologies. Book of Abstracts of 23rd International Conference-School

 
Svetainėje yra naudojami slapukai. Daugiau apie naudojamus slapukus.